| 1. | Full - duplex communication
全双通通信 |
| 2. | Half - duplex communication
半双通通信 |
| 3. | A high tech , multimedia language learning environment . its multichannel design with full duplex communications
为教师与学生创造了先进的全媒体互动式语言 |
| 4. | The system takes great advantages of utilizing the duplex communication to solve the multi - processors communication problem instead of
今后的工作将主要集中在本软件在实际应用中的升级维护以及控制功能的进一步扩展两方面。 |
| 5. | So several technologies are adopted to solve the problem . these technologies includes switching , full - duplex communication mode , vlan and qos , which are used to make the ethernet real - time
提出确保以太网在工业控制中实时性的措施，主要包括：交换、全双工通讯模式、虚拟局域网、质量服务( qos )等技术。 |
| 6. | Between the center and the devices , the duplex communication links are created through the public switched telephone network , thus the remote management for the devices is realized
集中管理中心与集中管理式电话计费器之间可通过公众电话网以拨号方式建立双向通信链路，从而实现对集中管理式电话计费器的远程管理。 |
| 7. | Since some equipments used in the system are not always full duplex , we developed a novel link control protocol - dynamic sliding window protocol , which is adaptive to both of the half - duplex and full - duplex communications
针对短波通信系统中可能存在半双工的通信设备，我们开发了半双工与双工信道均适用的差错控制协议? ?动态滑动窗口协议。 |
| 8. | Moreover , according to presentation of development of existing data - collecting software inland , the problem about duplex communication in data - collection software of hydrological detection and reporting system is authentically solved
而且根据目前国内水情自动测报系统中心水情数据采集软件的实际情况，解决实现真正意义的双工采集软件的问题。 |
| 9. | 2 ) modify the commonly used protocols on isdn because the standard protocols are commonly designed for duplex communications and the specialty of data capturing and analysising determines that the standard protocols cannot be followed
( 2 )对isdn上常用协议的修改由于标准的协议一般都是针对双方通讯而设计的，而截获数据分析的特殊性决定了不能遵循标准协议。 |
| 10. | The first step is to realize the point to point full duplex or half full duplex communication . the second step is to realize the communication network between many points . the last step is adding telemetry and navigation based on the second step
邻近链路项目主要分成3个阶段,第一个阶段是实现点对点的全双工或半双工通信,第二个阶段是实现多点之间的通信网络,第三个阶段是在第二个阶段的基础上加入遥测导航的功能。 |
